Based on Scythe best seller and repeatedly awarded Mugen 5 CPU Cooler, the ARGB Plus edition impresses with complete addressable RGB lighting. By adding the second fan for a push-pull mode, increased air flow is achieved and exhaust heat is more efficient. ARGB fan and the top cover are completely illuminated by addressable RGB LEDs, sync and controlled by ARGB motherboards or controller (included), Mugen 5 ARGB Plus provide not only top-tier performance but also vivid and breathtaking visual accent with continuously changing light effects for your build.
Fully Addressable RGB Design
Equipped with dual ARGB Kaze Flex 120 mm PWM fans with maxium speed of 1500 rpm and an eye-catching ARGB top cover, the addressable RGB LEDs can be managed by motherboards with ARGB headers or by the included ARGB Controller (ACT-1000L). The cooler provides top-tier performance as well as vivid, colorful effects from all view angles.
Wired ARGB Controller
The cooler is sync and controlled with ARGB motherboard or ACT-1000ARL included. The case reset button can be connected to controller making it easier to choose lighting mode. The controller is programmed with 14 modes of lighting effects and 5 modes of lighting speed, 16 million colors can be achieved easily with this small controller.
Thanks to an offset layout (gently sloped heatpipes, heat sink not located directly above the bottom plate), the cooler will not overhang RAM slots. On 2011 (v3) / 2066 platforms, the rear fan can be mounted higher to fit tall memory heat-spreaders, which increases the overall height of the cooler.
Kaze Flex 120 ARGB PWM Fan
Equipped with an addressable RGB LED fan. Eight individually controllable LEDs illuminate the translucent fan blades and enable complex color effects and gradients. The self-contained fluid bearing (Sealed Precision FDB) significantly reduces the friction that occurs during operation and thus achieves a lifespan of up to 120 000 hours. The rubber decouplers, which are kept entirely in black, fit optically into the overall design and reduce the transmission of any vibrations. The LEDs can be controlled directly via 3-pin 5V ARGB header.